Engineers evaluating connectors often narrow choices by three measurable criteria—core specs, certified ratings, and precise dimensions—because small deltas in those numbers change fit, performance, and compliance. This article consolidates verified data points and practical takeaways for AV87-15J4AZN to enable rapid suitability assessment.
Product Overview & Typical Applications
The AV87-15J4AZN is a specialized board- or panel-mount connector within a sealed circular/rectangular family, engineered for combined signal and low-to-medium power distribution. It serves as a critical interconnect between cable assemblies and system enclosures, offering high contact density in a ruggedized compact form factor.
Key Application Environments
- Aerospace: Ground support equipment and cabin subsystems.
- Industrial Automation: Ruggedized control cabinets and PLC interfaces.
- Transportation: Subsystems requiring high vibration resistance and sealing.
- Field Service: Portable test rigs and diagnostic instrumentation.
Complete Technical Specs & Materials Analysis
The following table outlines the core mechanical and electrical boundaries for the AV87-15J4AZN. Engineers should verify these against specific system load profiles.
| Parameter Field | Technical Specification / Units |
|---|---|
| Rated Voltage | 250V AC/DC (Typical) |
| Rated Current per Contact | Up to 13A (Subject to AWG) |
| Contact Material / Plating | Copper Alloy / Gold over Nickel |
| Insulation Material | High-Temp Thermoplastic (UL94-V0) |
| Operating Temp Range | -55°C to +125°C |
| Mechanical Life | 500+ Mating Cycles |
| Recommended Mounting Torque | 0.8 - 1.2 N·m |
Performance Ratings & Reliability
Environmental & Mechanical Resilience
The AV87-15J4AZN is designed to meet IP67 standards, ensuring dust-tight operation and protection against temporary immersion. Military-standard (MIL-STD) vibration and shock profiles are typically supported, making it resilient against the G-forces found in heavy industrial machinery and aerospace launches.
Materials & Corrosion Resistance
Gold plating on signal contacts prevents fretting corrosion, a common failure mode in high-vibration environments. For maritime or high-humidity deployments, the use of stainless steel or treated aluminum shells provides an essential barrier against oxidation and chemical aging.
Installation & Procurement Checklist
Mechanical Interface Checklist
- Panel Cutout: Ensure alignment with ASME Y14.5 tolerances.
- Mating Depth: Account for backshell clearance in tight enclosures.
- Keying: Verify shell orientation to prevent cross-mating.
Procurement Language for Purchase Orders
PART NO: AV87-15J4AZN
DESC: Sealed Multi-Contact Connector
REQ: Gold Plating, IP67 Rating, Lot Traceability, CoC Required.
